4/23/2024 0 Comments Remove molex connector from fan![]() ![]() Step 1: Remove the CPU Coverįirstly, remove the cover of your CPU. You’ll need an extra RGB fan dual connector and an RGB controller to connect RGB fans with a motherboard with no header. Yes, you may think it is complicated, but it is not that complicated to connect RGB fans with a motherboard with no header. (C) Connecting an RGB Fan To a Motherboard With No Header Cover up the CPU to finish the adjustment process. Now, mount the RGB fan on the CPU cover with screws provided by the manufacturer. Step 4: Inserting the RGB CableĪfter that, you only have to insert the RGB cable of your RGB fan into your motherboard’s RGB header. You can also insert a 4-pin RGB fan connector into 3 or 4 holes included in the motherboard. Inserting the connector ensures maximum RPM. You’ll have to insert a dual 4-pin RGB fan connector with the motherboard’s fan header. Step 3: Attach the RGB Fan Connector To Motherboard Header Read the manual properly before proceeding to further steps. Open the kit with an RGB fan, you’ll find some screws, an RGB fan with two 4-pin wires, and a user manual. To open up your motherboard’s pots, slots, and headers you have to take out your CPU cover. You’ll need an extra RGB dual fan connector to connect RGB fans to your motherboard. Well, it is a little complicated to connect a 4-pin RGB fan to your motherboard. ![]() (B) Connecting a 4-pin RGB Fan To the Motherboard Once you have finished the adjustment of the RGB fan on your motherboard, put the CPU cover on to finish the process. Press on the connections to make sure they are connected tightly. You can easily locate the RGB port if you notice RGB marks on your motherboard. Step 4: Inserting the Wire Into the Motherboard HeaderĪfter mounting the RGB fan on the CPU case, you have to insert the 3-pin wire into your motherboard’s fan header and the 4-pin wire into the RGB header of your motherboard. Now, you have to mount RGB fans on the CPU cover with the screws provided by the manufacturer on the fan kit. Step 3: Mount the RGB fan to the CPU Cover ![]() You’ll find an RGB fan with two-wire, one with 3-pin and the other with 4-pin. Unbox the kit with The RGB fan and read the manual before connecting the fan to your motherboard. After removing the cover of the CPU, you can easily access your motherboard’s slots, ports, and headers. You have to open the CPU cover first to insert an RGB fan on your CPU. You don’t need any type of extra connector and controller to connect 3-pin RGB fans to your motherboard. It is simple to connect 3-pin RGB fans with your motherboard. (A) Connecting a 3-pin RGB Fan To the Motherboard So, here you find a total 3 types of RGB based on connection interface – If your motherboard has no header, you’ll have to use an RGB controller to fit in. You have to use a fan connector if you want to connect a 4-pin RGB fan to your motherboard. All those two types of RGB fans can be connected differently on your motherboard. ![]() There are two types of RGB fans (3-pin & 4-pin) to fit into your CPU’s motherboard. I am going to discuss the connection of different types of RGB fans to motherboards. How Do I Connect RGB Fans To Motherboard Baes on the RGB Fan’s Pin Types? However, some fans come with a controller connected to the power supply, and in this case, the RGB will work without needing a special RGB header on the motherboard. If your motherboard doesn’t have an RGB header, the fan will spin, but the RGB lights may not work. Whether your motherboard is compatible with RGB fans depends on the type of RGB fan you get. Does My Motherboard Compatible with RGB Fans? ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |